303® Fabric Guard keeps fabrics fresh, soft, colourful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains.
Use it to keep rugs clean and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking.
When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favourite fabrics crisp and clean for years to come.
DIRECTIONS:
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE: 40-75 sq. ft. (3.7 x 7m² per 16oz) depending on material and application method.
EXAMPLE USE CASES
PATIO CUSHION
Untreated: Cushions are stained and water soaks into the fabric.
Treated with 303 Fabric Guard: Water and soil repel from the fabric, prolonging its life.
UMBRELLA
Untreated: The umbrella is stained from outdoor elements and rain.
Treated with 303 Fabric Guard: Water and soil repel from the fabric and it is protected from outdoor elements.
